Cup Holder for Right-Side MHG-036 (Cup Holder Right)

A cup holder that can be installed at an easily-reachable distance, making it easy to slot in and take out drinks.

Product features

• It can be easily installed by peeling off the double-sided tape and inserting it into the door window slit. (Double-sided tape does not leave marks on the car and can be removed again.)
• A design that matches Jeep’s interior creates a sense of unity with the interior of the vehicle.
• Removable coasters can be washed with water.
• Compatible with a wide range of drink sizes, from thin canned drinks to thick bottles (up to 30oz size).
• It does not block the airflow of the air conditioner. If you align the direction of the air with the drink, you can keep the drink warm or cold.
• 2-door and 4-door compatible.

*Cannot be installed on vehicles equipped with Dual Door Group.
*When installing on the left side (the passenger seat of a right-hand-drivemodel), placing a large drink may block 1/3 of the view of the inner side of the side mirror.

Compatible Car Models

Cup Holder for Left-Side MHG-037(Cup Holder Left)

A cup holder that can be installed at an easily-reachable distance, making it easy to slot in and take out drinks.

Product features

• It can be easily installed by peeling off the double-sided tape and inserting it into the door window slit. (Double-sided tape does not leave marks on the car and can be removed again.)
• A design that matches Jeep’s interior creates a sense of unity with the interior of the vehicle.
• Removable coasters can be washed with water.
• Compatible with a wide range of drink sizes, from thin canned drinks to thick bottles (up to 30oz size).
• It does not block the airflow of the air conditioner. If you align the direction of the air with the drink, you can keep the drink warm or cold.
• 2-door and 4-door compatible.

*Cannot be installed on vehicles equipped with Dual Door Group.

Compatible Car Models

Map lights MHG-038

As it is battery-powered, there is no need for wiring work.
It can be easily installed using industrial grade heat resistant double-sided tape made by 3M.

Product features

• Using three N batteries (sold separately), battery life is approximately a year and a half.
• Uses a warm-colored LED (23 lumens) that is similar to the color of the genuine room lamp.
• Equipped with an afterglow function that keeps the light on for about 2 seconds when the switch is turned off.
• The button mechanism uses a silicon material instead of a spring to reproduce a touch similar to that of genuine buttons.
• It has an automatic turn-off function that turns the lights off after approximately 7 minutes to prevent batteries from draining.
• The design matches the surroundings of the Jeep’s room mirror to create a sense of unity with the interior of the vehicle.
• 2-door and 4-door compatible.

※Not available for vehicles equipped with Sky One-Touch™ Power Top.

Compatible Car Models

Keyhole Covers MHG-039

By covering the plated part of the genuine keyhole, the area around the doorknob is blacked out to give the vehicle a sleek look.

Product features

• The keyhole covers can be easily installed and removed with a magnet, the cover prevents the keyhole from getting clogged with mud and dirt.
• The silicone rubber on the back of the cover prevents the cover from turning once it is installed, thereby preventing the genuine keyhole from being scratched.
• The keyhole covers are designed to match the fuel filler cover and come in a three-piece set with 2 × large-size + 1 × small-size covers.

Compatible Car Models

Rear Window Grip Handle MHG-041

Exclusive for hard top vehicles. Makes it easy to reach and close the rear window (especially for Jeeps that are lifted).
Grip handle can be retracted to keep the genuine minimalist look of Jeeps.

Product features

• Keeps the rear window glass surface clean and fingerprint free.
• Easy to install by using the two existing bolts to secure the grip handle in place.
• Designed and colored to match the interior design of Jeeps after installation. Looks like an original equipment!
• Compatible with both right-hand drive and left-hand drive Jeeps.
• For Jeep Wrangler 2018-2024 ( JL ) Exclusive for hard top vehicles

Compatible Car Models

Rear Defogger Cable Cover MHG-042

Covers the exposed rear window defogger cable and connector for a refined appearance of an original equipment and reduces the likelihood of damaging the cable when loading and unloading equipment for Jeep Wrangler (JL) 2018-2024.

Product features

• Prevents damage and disconnection of exposed rear window defogger cable and connector
• Easy to install by using industrial grade double-sided tape.
• Designed and colored to match the interior design of Jeeps after installation. Looks like an original equipment!
• Compatible with both right-hand drive and left-hand drive Jeeps.
• For Jeep Wrangler 2018-2024 (JL) Exclusive for hard top vehicles
• Double-sided tape is made of 3M VHB Y-4180, which is heat resistant and durable.

Compatible Car Models

For Jeep Wrangler (JL) / Gladiator (JT) MHG-044

Turn Signal Lever Extension blinker switch extension for Jeep Wrangler (JL) / Gladiator (JT) 2018-2024 Black color Wrangler Accessories indicator switch extension

Product features

• This extends the turn signal lever on the Wrangler, which is further away from the driver than other cars, some 25 mm to improve operability by alleviating any difficulty in gripping the turn signal lever, and reducing the weight resistance in using the turn signal by about 20%.
• It is easy to install simply by fastening the product with the wrench provided.
• The high-grade coating finish matches the color of the car’s interior.
• Do not attempt to install this product in non-specified locations.
• It is compatible with both right-hand-drive and left-hand-drive models.
• An instruction guide is included inside the packaging. Please make sure to read it before installing the product.

Compatible Car Models

For Jeep Wrangler JL 2018-2024 JK 2011-2017 MHG-045

This product is a rear windscreen rain hood for Jeep Wrangler (JL/JK) hard-top vehicles

Product features

• This cannot be installed on soft-top vehicles.
• This product guards against rainwater and dust falling onto the luggage space from above when opening and closing the rear windscreen.
• It is also ideally suited when using a rear-facing drive recorder as the rain hood will not obstruct the drive recorder while the rear windscreen is closed.
• CORDURA Ballistic Fabric by NVISTA employs a high-density, woven nylon structure for extra strength, making it hold up against abrasion, wear and tear, and fraying, while being used in military applications across the globe where reliability is of utmost importance.
• A PU coating has been applied to CORDURA Ballistic Fabric, resulting in a fabric with outstanding water repellency.
• 3M and Nitto double-side adhesive tape is used according to the application. compatible JL 2018 – JK 2011 after model – 4xe 2021 –
• Made in Japan
• Please make sure to remove any snow, fallen leaves, or debris adhered to the glass hatch before opening it. Also, be mindful that the rain hood may have difficulty closing properly if foreign objects accumulate on it.

Compatible Car Models

For Jeep Wrangler JL 2018-2024 / JT 2020- models MHG-046

Coasters for attaching to the genuine center drink holder of a Jeep Wrangler

Product features

• The design pattern matches the car’s interior design and does not distract from the interior image.
• The design is exclusive to the car model and does not interfere with the illumination of the cup holder.　This is limited to certain vehicles.
• Easy to take out with pull-tab and washable when dirty.
• Fits 2018 – JL models / 2020 – JT models. Cannot be used on rear cup holders.

Compatible Car Models

For Jeep Wrangler (JL) / Gladiator (JT) 2018-2024 MHG-048

Paddle Switches for Jeep Wrangler (JL) / Gladiator (JT) 2018-2024

Product features

• Introducing the paddle switch designed to enhance the operability of the steering wheel switch, inspired by the paddle shift, available exclusively on the top-tier Wrangler JL model, 392.
• Installation is simple—just tighten the included screws with the included wrench.
• The chrome finish around the steering complements the interior seamlessly.

Compatible Car Models

For Jeep Wrangler (JL) / Gladiator (JT) MHG-049

Rear View Mirror for Jeep Wrangler (JL) / Gladiator (JT)

Product features

• This product uses a 3000SR curved mirror, providing 1.7 times wider field of view compared to the original mirror while maintaining a natural sense of distance.
• The glass mirror measures 30 cm (11.8 inches) in width and 7.8 cm (3 inches) in height.
• It features an anti-shatter coating that helps prevent fragments from scattering in case the mirror breaks.
• Installation is easy and requires no tools – simply align the front and back parts to attach.

Compatible Car Models

For Jeep Wrangler (JL) / Gladiator (JT) MHG-050L

Sun Visor for Jeep Wrangler (JL)/Gladiator (JT) Left Side Only

Product features

• This product reduces bright sunlight during the day, improving visibility of traffic lights and road signs.
• It can be used even when wide mirrors (up to 300mm) make the original sun visor unusable.
• The damper hinge at the joint ensures a perfect fit with the original sun visor.
• Made from UV400-cut polycarbonate material, it protects your eyes from harmful UV rays.
• It allows sunlight to be blocked from the front with this product, while using the original sun visor to block light from the side window.
• For left-side use.

Compatible Car Models

For Jeep Wrangler (JL) / Gladiator (JT) MHG-050R

Sun Visor for Jeep Wrangler (JL)/Gladiator (JT) Right Side Only

Product features

• This product reduces bright sunlight during the day, improving visibility of traffic lights and road signs.
• It can be used even when wide mirrors (up to 300mm) make the original sun visor unusable.
• The damper hinge at the joint ensures a perfect fit with the original sun visor.
• Made from UV400-cut polycarbonate material, it protects your eyes from harmful UV rays.
• It allows sunlight to be blocked from the front with this product, while using the original sun visor to block light from the side window.
• For right-side use.

Compatible Car Models

For Jeep Wrangler (JK) MHG-051

Keyhole Covers for Wrangler JK 2007-2017 models.

Product features

• Designed specifically for the Wrangler JK, these keyhole covers seamlessly blend with your JK’s rugged aesthetic.
• The 3-pack.

Compatible Car Models